The economic benefits of filtering, washing and drying three-in-one are great

Filtration, washing and drying three-in-one has greater economic benefits
Filtration, washing and drying three-in-one is to complete the process of stirring, reaction, filtration, cleaning, dehydration, drying (and secondary beating) in a closed container. It has the characteristics of simple structure, simplified process flow, high production efficiency, no cross-contamination, convenient material replacement, and high degree of automation. At the same time, the volume of the required clean workshop can be greatly reduced, and the basic investment cost is low.

Widely used in pharmaceutical, chemical, food, dye and other industries, especially suitable for production occasions with high cleanliness requirements, small batches of multi-product varieties and large batches.
Filtration, washing and drying three-in-one is equipped with hollow ribbon stirring and equipment jacket, both of which are drying heat medium circulation systems, to ensure that the materials receive heat energy to the greatest extent, combined with the no dead angle turning structure, greatly improving the heat exchange capacity of materials, so the drying efficiency is high. 1-2 times that of the traditional process; filter washing and drying equipment has accumulated nearly 15 years of market experience, and its application range is very wide in intermittent batch operation production lines.
Advantages of filter washing and drying three-in-one product:
1. Closed system: The three-in-one filter, washing and drying system is a fully closed system. Production and operation in the closed system can avoid air pollution from toxic substances, and at the same time reduce the occurrence of poisoning accidents by operators.


2. Recycling: materials and solvents are almost completely recovered, avoiding waste caused by material omission and solvent volatilization, which has great economic benefits.
3. Multifunctional integrated operation: filtering, washing and drying are completed in the same equipment. The vessel walls are equipped with heating jackets to allow drying.


4. Continuous operation: Filtration and drying are carried out in a continuous system, no need to deal with wet filter cake. The dried products can be mechanically transferred to the weighing and packaging sections.
5. Saving manpower: a non-technical person who has undergone simple training can complete the operation.

Opening, closing, automatic feeding and automatic discharging do not require technical personnel to monitor.
6. Thorough cleaning: The filter, washing and drying three-in-one has the functions of automatic spraying and stirring, and the filter cake can be fully cleaned, thereby reducing the amount of sewage and reducing the cost of wastewater treatment.
7. Clean production: The multifunctional filter drying system is equipped with a dust collector to collect the dust produced after drying, which can meet the requirements of clean production.